How Much Does Concrete Pouring Cost

In mainstream Christian tradition, the rhetoric for true wisdom is exemplified by the building of a house on the rock. Similar good sense applies in modern construction, and hence contemporary building projects are always preceded by pouring decent substitute such as concrete. Simply put it, no building project begins without pouring of concrete.

When it comes to estimating the concrete pouring cost, the figures are always directly reflected by its total dimensions. In the United States, the average rate of poured concrete slab roughly costs $5 to $8 per square foot. Hence, if you are looking at the conventional 1,000 square feet project, the rough projection of total average budget is from $5000 to $8000.

The total cost is usually divided into two categories. The first aspect that determines the overall price to pour Pouring concreteconcrete is the material – hence, the concrete slab which typically costs between $3 and $5 per square foot. The other half that constitutes the total budget is the labor cost. Concrete specialists or contractors usually charge $2 to $3 per square foot coverage. This generic price range, however, does not reflect time-based deal.

The usual period it takes to get the pouring of concrete completed is within three to four days. It is important to consider, however, that other aspects could affect the time to complete the concrete foundation. These include soil composition, terrain difficulty, and ground stability. These factors are manifested during the land clearing, land grading, and the excavation.

Deep Strip Foundations Cost

There are no one-size fits all when it comes to answering the question of “how much does it cost to pour concrete?” As mentioned earlier in the article, the difficulty assessment of the entire project is determined after the land clearing, land grading, and excavation. The conventional method of pouring concrete foundations only applies when the area is ‘good.’ The definition of good is that there are no real obstacles in terms of laying the groundwork. 

If the territory is not problematic, most contractors or concrete technicians would use the generic method called ‘deep strip foundations.’ It is the least expensive method since the ground itself is very manageable. In most cases, deep strip foundations usually have a depth of 1 meter and measuring a width of 600 millimeters. Here is an example of a total cost for deep strip foundation within 7×10 dimensions…

30 cubic meters of excavation costs $999.34. A total of 45 cubic meters loaded into truck cost $842.56. Reinforced mesh costs $236.06. Soil disposal including labor tip costs $1383.19. 10 cubic meters of concrete foundations costs $1,646.85.

Hence, the total cost of deep strip foundation given the dimensions and the overall cost inclusion is approximately $5,107.88. This example reflects the lowest average cost featured in the introductory paragraph.

Trench-fill Foundations Rate

Since the overall condition of the terrain can affect the concrete pouring cost, a ‘tricky plot’ is often avoided by most contractors because of the steep price entailed for the groundwork. ‘Trench-fill foundations’ are meant to deal with laying concrete foundations on unstable terrain. Unlike the deep strip method, the level of concrete is usually higher, occupying most of the excavated corner right up to the brim.

In most cases, the depths of excavation are only relatively shallow in comparison. However, special considerations are included if the construction site has nearby trees. Planted trees make lower-depth soil soggy. Hence, excavators need to dig an average depth of 3 meters to reach a more solid ground level.  For a much deeper trench-fill foundation, experts usually add compressible material at the sides of the trench. For a shallow trench-fill type, here are the projected cost inclusions comprising the overall expense given the same 7×10 dimensions…

30 cubic meters of excavation entails $998.35. The same cost is also required for hauling 45 cubic meters into the truck, as well as the tip and standard cost for soil disposal. A reinforced mesh costs $472.13. Lastly, the 25 cubic meters of concrete poured into the hollows entails $4,118.38. You are looking at a total average of $7,815.

workers pouring concrete fillingsFor a terrain that has trees nearby, a different estimate is reflected given the same 7×10 dimensions. This time the excavation accumulates a volume of 50 cubic meters, for which the cost spikes up to $1,844.25. The 75 cubic meter volume loaded into the truck costs $1,404.08. The cost for soil disposal, including the tip, reaches $2,305.31. The additional compressible material, positioning and slip membrane costs $745.08. Reinforcement mesh costs $501.64 and the 45 cubic meters of concrete foundations entails as much as $7,413.09. You are looking at a total average cost of $14,213.44.

DIY Cost-saving Strategy

People on a tight budget would often ask “how much does it cost to pour concrete if I/we do most of the labor?” One can always minimize the overall cost by minimizing the workload of the contractors. An average estimate for some project proprietors who does most of the labor was able to account as much as $4000 worth of savings.

It is important to bear in mind, however, that people who aim to reduce the cost should be able to perform the procedures correctly. After all, a mistake would prompt assisting contractors to amend the structural error of one or more aspects of the cost inclusion, prompting them to charge an extra over the fixed rate. People who were able to configure the terrain of the ‘tricky plot’ (e.g. flattening the slopes) have a better chance of negotiating a bargain for the price to pour concrete.

Top 10 Locations With Labor Cost Discount

Anyone located in these particular cities in the United States has a relatively cheaper labor cost than the national average. It is important to take note, however, that cost variations among these places do not necessarily include the budget for materials.

Las Cruces, New Mexico: 43% less

Huntsville, Texas: 41% less

Galion, Ohio: 34% less

Pittsford, Michigan: 32% less

Enid, Oklahoma: 27% less

Provo, Utah: 18% less

Bulverde, Texas: 16% less

Ellenville, New York: 16% less

Amarillo, Texas: 15% less

Clinton, Los Angeles: 14% less

Click Here to Leave a Comment Below 0 comments

Leave a Reply: